Membuat Jalan Beton di Tanah Lunak Dengan Metode Cerucuk Kayu Galam

Authors

  • Sulardi Sulardi STT Migas Balikpapan
  • Agus Sugianto

DOI:

https://doi.org/10.36277/abdimasuniversal.v4i1.156

Keywords:

cerucuk galam, soft soil

Abstract

The problem faced is the difficulty of making the road body on soft soil in the former swamp location. The purpose of community service is to provide technical assistance to make roads on soft soil using simple appropriate technology by utilizing the availability of materials that are cheap and widely found in the market. The working method used is the galam wood chisel method which is installed with a distance of 60 cm and above the cerucuk is installed galam wood girder. The pair of girders and culms of galam wood will then distribute and even out the load on them so that the road body does not experience subsidence and deformation. The results of the improvements made in this community service activity show that the Galam wood cerucuk method is proven to be suitable and suitable to be used to overcome the problem of difficulty in building roads on soft soil. The results of the work that has been done also show that the access road built on soft soil is proven not to be damaged, not cracked, not deformed after being used to serve light vehicle traffic to truck vehicles with loads.

Downloads

Download data is not yet available.

References

Darwis. (2017). Dasar-dasar Teknik Perbaikan Tanah. Yogyakarta: Penerbit Pustaka AQ.

Gaffar, Z.A. (2005). Perkuatan Dengan Cerucuk Galam Diatas Tanah Lunak. Jurnal Info Teknik, Universitas Lambung Mangkurat, Banjarmasin, 6(2).

Sulardi. (2017). Reposisi Pipa Transfer Line Flare Stack Dengan Alat Roll Geser dan Metode Penarikan. Jurnal Teknologi Bahan dan Barang Teknik (B4) Bandung, 7(2).

Sulardi. (2017). Pelindung Pipa Gas Bawah Tanah Jalan Dengan Metode U-Ducting Reinforced Concrete. Jurnal Sain Terapan, Politeknik Negeri Balikpapan, 4(1).

Sulardi. (2018). Proteksi Pipa Gas Bawah Badan Jalan Dengan Metode U-Ducting Reinforced Concrete. Jurnal Sain Terapan Politeknik Negeri Balikpapan, 6(2).

Sulardi. (2018). Analysis of Failure Base Plate Anchor Flare Stack Foundation and Repair Method, International Conference on Geotechnics (IC Geotechnics) Sustainable Development Challlengeres in Geotechnics, 24-26 July 2018, Yogyakarta, Indonesia.

Sulardi. (2018). Mengatasi Limpasan Banjir Dengan Metode Redimensi Parsial Badan Air Sungai. Jurnal Riset Pembangunan, Balitbanga Propinsi Kalimantan Timur, 1(1).

Sulardi. (2018). Menekan Korosi Base Plate Pondasi Tangki Dengan Metode Drainase Horizontal Geopipe Dibawah Pondasi. Jurnal Potensi Politeknik Negeri Bandung, 20(1).

Sulardi. (2018). Pembangunan Tangki Dengan Metode Jack Up. Jurnal Potensi Politeknik Negeri Bandung, 2(2).

Sulardi. (2018). Perbaikan Penurunan Pondasi Dengan Metode Leveling. Jurnal Teknologi Sipil Universitas Mulawarman.

Sulardi. (2019). Mengatasi Limpasan Banjir Dengan Metode Modifikasi dan Reroute Saluran. Jurnal Riset Pembangunan, Balitbanga Propinsi Kalimantan Timur, 2(1).

Sulardi, dkk. (2020). Pemasangan Saluran Drainase Pipa Buis Beton di Tanah Lunak Menggunakan Pondasi Kaca Piring. Jurnal Abdimas Universal, 2(2).

Sulardi, dkk. (2021). Pondasi Balik Kotak Di tanah Lunak. Jurnal Info Teknik, 4(2).

Sulardi, dkk. (2021). Mengatasi Limpasan Banjir Dengan Normalisasi Saluran Drainase di Kelurahan Baru Ilir Kota, Balikpapan. Jurnal Abdimas Universal Universitas Balikpapan, 3(1).

Sulardi, Tatag Y., R. (2022). The Performance of Skewers Foundation Combined With Revetment Under Rapid Drawdown Conditions On Balikpapan Coastal Area In Soft Soil Using Numerical Analysis Undrained B, International Journal of Research In Vocational Studies (IJRVOCAS), 2(1).

Downloads

Published

2022-04-21

How to Cite

Sulardi, S., & Sugianto, A. (2022). Membuat Jalan Beton di Tanah Lunak Dengan Metode Cerucuk Kayu Galam . Abdimas Universal, 4(1), 79–83. https://doi.org/10.36277/abdimasuniversal.v4i1.156

Issue

Section

Artikel