Pelatihan Pengendalian Risiko pada Keselamatan Kerja di Jasa Binatu
DOI:
https://doi.org/10.36277/abdimasuniversal.v5i2.308Keywords:
safety, laundry, control, hazard, industryAbstract
Laundry services are essential to support other industries, such as tourism and health. Hospitals, hotels, and restaurants are customers of the laundry industry. Occupational health and safety risks in the laundry sector have become a government concern through the Ministry of Health of the Republic of Indonesia issuing the Hospital Laundry Ergonomics Guide. This activity aims to provide knowledge regarding occupational safety risk control for the laundry service industry. Workers in this sector face risks of ergonomics and chemical hazards. Ergonomics risk comes from lifting and transporting linen material in sorting, washing, and drying activities up to the final process. Workers need to be given the insight to care about safety and how to control the hazards they face. By carrying out this activity, it is hoped that participants will become more aware of occupational safety risk control to improve their quality of life.
Downloads
References
Ahmad, A.C., Zin, I.N.M., Othman, M.K., Muhamad, N.H. (2016). Hazard Identification, Risk Assessment and Risk Control (HIRARC) Accidents at Power Plant, in: MATEC Web of Conferences, pp. 1–6. https://doi.org/10.1051/matecconf/20166600105.
Boustras, G., Bratskas, R., Tokakis, V., Efstathiades, A. (2011). Safety awareness of practitioners in the Cypriot manufacturing sector. J. Eng. Des. Technol, 9, 19–31. https://doi.org/10.1108/17260531111121440.
Bridger, R.S.P.D. (1995). Introduction to Ergonomics. Mc-Graw-Hill, Inc: Singapore.
Direktorat Jenderal Kesehatan Masyarakat Kementerian Kesehatan RI. (2021). Pedoman Ergonomi Laundry Rumah Sakit.
Fadhilah, M.Y., Safitri, D.M., Adisuwiryo, S. (2022). Pencegahan Strategi Lean Safety-HIRARC untuk Pencegahan Kecelakaan pada Stasiun Kerja Mob Cap di PT. Anara Medical Indonesia. J@ti Undip J. Tek. Ind, 17, 102–117. https://doi.org/https://doi.org/10.14710/jati.17.2.102-117.
Freivalds, A., & Niebel, B.W. (2014). Niebel’s Methods, Standards, and Wrk Design. McGraw-Hill: Pennsylvania.
Kroemer, K.H.E., & Grandjean, E. (1997). Fitting the Task to the Human. https://doi.org/10.1017/CBO9781107415324.004.
Niebel, B., & Freivalds, A. (2014). Methods, Standards, and Work Design. McGraw-Hill: Boston.
Reis, D.C. dos, Ramos, E., Reis, P.F., Hembecker, P.K., Gontijo, L.A., Moro, A.R.P. (2015). Assessment of Risk Factors of Upper-limb Musculoskeletal Disorders in Poultry Slaughterhouse. Procedia Manuf, 3, 4309–4314. https://doi.org/https://doi.org/10.1016/j.promfg.2015.07.423.
Safitri, D.M., Rahmawati, N., Faradilla, A. (2021). Perancangan dan Pengukuran Kerja. Nas Media Pustaka, Makassar, Yogyakarta, Indonesia.
Safitri, D.M., & Septiani, W. (2019). Peningkatan Perilaku Keselamatan pada Operator Swasta Bus Transjakarta. Jakarta.
Safitri, D.M., & Septiani, W., Azmi, N., Rizani, N.C., Rahmawati, N. (2022). Ergonomika. Nas Media Pustaka: Yogyakarta.
Safitri, D.M., Surjandari, I., Sumabrata, R.J. (2020). Assessing factors affecting safety violations of bus rapid transit drivers in the Greater Jakarta Area. Saf. Sci, 125. https://doi.org/10.1016/j.ssci.2020.104634.
Safitri, D.M., & Wartono, A.B. (2016). Perbaikan Ergonomi untuk Menurunkan Risiko akibat Pekerjaan yang Berulang di Grease Plant Workstation. Semin. Nas. Teknol. Informasi, Komun. dan Ind. 8 8, 291–295.
Salvendy, G. (2012). Handbook of human factors and ergonomics. John Wiley & Sons.
Souza, D.S.F. de, Silva, J.M.N. da, Santos, J.V. de O., Alcântara, M.S.B., Torres, M.G.L. (2021). Influence of risk factors associated with musculoskeletal disorders on an inner population of northeastern Brazil. Int. J. Ind. Ergon. 86, 103198. https://doi.org/https://doi.org/10.1016/j.ergon.2021.103198.
Sulaiman, F., & Sari, Y.P. (2018). Analisis Postur Kerja Pekerja Proses Pengeasahan Batu Akik Dengan Menggunakan Metode Reba. J. Optim. 1, 16–25. https://doi.org/10.35308/jopt.v1i1.167.
Uhrenholdt Madsen, C., Kirkegaard, M.L., Dyreborg, J., Hasle, P., Karanikas, N., Popovich, A., Steele, S., Horswill, N., Laddrak, V., Roberts, T., Nwankwo, C.D., Theophilus, S.C., Arewa, A.O., Kwasi, D., Fernandez, M., Guan, X., Lyu, R., Shi, H., Jun, C., Liu, Q., Dou, F., Meng, X., Dahler-larsen, P., Sundby, A., Boodhoo, A., Aik, J., Turner, R.M., Kirk, M.D., Heywood, A.E., Newall, A.T., Boeck, E. De, Jacxsens, L., Kurban, S., Wallace, C.A., Behie, S.W., Halim, S.Z., Efaw, B., Connor, M.O., Quddus, N., Pęciłło, M., Afonso, P., Rodrigues, M.A., Kruse, T., Veltri, A., Branscum, A., Cąliş, S., Buÿükakinci, B.Y., Kalashnikov, A., Sakrutina, E., Haas, E.J., Yorio, P.L., Kim, N.K., Rahim, N.F.A., Iranmanesh, M., Foroughi, B., Sk, A., Accou, B., Reniers, G., Yiu, N.S.N., Chan, D.W.M., Shan, M., Sze, N.N., Álvarez-Santos, J., Miguel-Dávila, J., Herrera, L., Nieto, M., Li, Y., Guldenmund, F.W., Valdez, O.A., Goerlandt, F., Yu, M., Quddus, N., Peres, S.C., Sachdeva, S., Mannan, M.S. (2020). Occupational Health and Safety Management Systems Applications and A System Planning Model. Saf. Sci. 52, 135–143. https://doi.org/10.1016/j.jsr.2019.10.005.
Widodo, L., Pramudya, B., Herodian, S., Syu’ab, F. (2006). Pendekatan Ergonomi Makro Sebagai Solusi Perencanaan Sistem Kerja Bergilir Untuk Meningkatkan Produktivitas, Kualitas, dan Keselamatan Kerja Industri. Keteknikan Pertan, 20, 12.
Wong, C.F., Teo, F.Y., Selvarajoo, A., Tan, O.K., Lau, S.H. (2022). Hazard Identification Risk Assessment and Risk Control (HIRARC) for Mengkuang Dam Construction. Civ. Eng. Archit. 10, 762–770. https://doi.org/10.13189/cea.2022.100302.
Zare, M., Black, N., Sagot, J.C., Hunault, G., Roquelaure, Y. (2020). Ergonomics interventions to reduce musculoskeletal risk factors in a truck manufacturing plant. Int. J. Ind. Ergon. 75, 102896. https://doi.org/10.1016/j.ergon.2019.102896.
