Pemasangan Lampu Sistem Otomatis Berbasis Photocell dan Sensor Gerak di Jembatan Dermaga Nelayan RT 26 Kelurahan Manggar Baru
DOI:
https://doi.org/10.36277/abdimasuniversal.v6i2.446Keywords:
technology, light sensor (photocell), motion sensor (PIR), energy saving, automatic systemAbstract
Lighting lamps are usually operated manually by humans. With current technological advances, human intervention in operations is being reduced. An automatic switch will make operations easier, effective and efficient to avoid lights burning in vain without any activity. The aim is none other than to avoid wasting electrical energy. This dedication takes the topic of designing a bridge lighting installation for a group of fishermen. This automatic switch uses input in the form of a Passive Infrared (PIR) human presence sensor and a light dependent resistor (LDR/Photocell) type light intensity sensor. PIR is a pyroelectric sensor which has a momentary response to the movement of objects and heat energy in living things. The heat source is radiated with infrared. The human body produces heat energy which is radiated by infrared. The human body's heat radiation will be received by the sensor for the circuit input response. The complete circuit consists of a passive infrared sensor, fresnel lens, main circuit, power supply, LDR and lighting load. In essence, the PIR and LDR will be transistor drivers. The transistor functions as an electronic switch that will disconnect and connect the lighting load. Light installation is carried out in the RT area. 26 Manggar Baru Subdistrict. Installing these lights is very beneficial for local residents, especially for fishermen when they want to dock their boats after fishing.
Downloads
References
Ade Ramdan, Dicky Rianto Prajitno, & Herlan. (2013). LED-based Smart Lamp with Multi Sensor Lampu Pintar Berbasis LED dengan Multi Sensor. Jurnal INKOM, 7(November), 67–73. http://jurnal.informatika.lipi.go.id/index.php/inkom/article/view/240/151.
Adisanjaya, N. ngurah, & Murna, M. (2019). RANCANG BANGUN SISTEM LAMPU PENERANGAN OTOMATIS MENGGUNAKAN SENSOR LIGHT DEPENDENT RESISTOR (LDR) UNTUK MENCIPTAKAN KONSEP KAMPUS HEMAT ENERGI (STUDI KASUS :UNIVERSITAS DHYANA PURA BALI). Indonesian Physical Review, 2(2), 57. https://doi.org/10.29303/ipr.v2i2.21.
Basrah Pulungan, A., Yuhendra, M., & Islami, S. (2021). Energi Alternatif Untuk Penerangan Lampu Jalan Surau Al Ikhlas Jorong Balai Gadang Sungayang Alternative Energy for Surau Al Ikhlas Jorong Balai Gadang Sungayang Street Lighting. Journal of Information Technology and Computer Science (INTECOMS), 4(2), 2021.
Hasibuan, A., Verawaty Siregar, W., & Fahri, I. (2020). Penggunaan Led Pada Lampu Penerangan Jalan Umum Untuk Meningkatkan Efisiensi Dan Penghematan Energi Listrik. Jesce, 4(1), 18–32. http://ojs.uma.ac.id/index.php/jesce.
Hendarto, D., & Padillah. (2017). Penerapan Smart Lighting Berbasis Photocell Pada Low Voltage Main Distibusion Panel ( LVMDP ) Sebagai Upaya Penghematan Energi. Fakultas Teknik Universitas Ibn Khaldun Bogor, 10–19.
Imamah, N., & Sagara Andika, D. (2021). PERANCANGAN SISTEM MONITORING DAN PENGENDALIAN LAMPU MENGGUNAKAN SENSOR GERAK DAN SENSOR CAHAYA DILENGKAPI INTERNET OF THINGS (IOT) (Studi Kasus Fakultas Teknologi Informasi Universitas Bale Bandung). Jurnal Informatika-COMPUTING, 08(02), 14–21.
Indriawan, M., Fransisca, F., & Renaldi, D. (2015). Perancangan Alat Lampu Dengan Sistem Sleep. Jurnal Sisfokom (Sistem Informasi Dan Komputer), 4(1), 7–12. https://doi.org/10.32736/sisfokom.v4i1.129.
Irfan, M., & Astutik, R. P. (2023). Rancang Bangun Sistem Monitoring Dan Kontrol Otomatis Lampu Lobi Kantor Berbasis Photocell Dan Timer Switch Di Rsud Ibnu Sina Kabupaten Gresik. E-Link: Jurnal Teknik Elektro Dan Informatika, 18(1), 65. https://doi.org/10.30587/e-link.v18i1.5355.
Kamelia, L., M.Subandhi, & Pratama, F. (2016). Rancang Bangun Sistem Kendali Lampu Otomatis Berbasis Sensor Gerak Dan Bluetooth Untuk Pengendalian Cahaya Pada Budi Daya Bunga Chrisanthenum Sp. SENTER 2016: Seminar Nasional Teknik Elektro 2016, November, 213–219.
Lukman, M. P., . J., & Rieuwpassa, Y. F. Y. (2018). SISTEM LAMPU OTOMATIS DENGAN SENSOR GERAK, SENSOR SUHU DAN SENSOR SUARA BERBASIS MIKROKONTROLER. Jurnal RESISTOR (Rekayasa Sistem Komputer), 1(2), 100–108. https://doi.org/10.31598/jurnalresistor.v1i2.305.
Naufal, B. I., Suhendi, A., & ... (2021). Rancang Bangun Sistem Pengendali Lampu Otomatis Menggunakan Skema Time Delay Berbasis Fuzzy. Telkatika …, 1(1), 9–19.
Pradana, A. W. (2021). Modifikasi Lampu Jalan Di Desa Dolok Merawan Dari Teknologi Hpln Ke Led Untuk Membantu Dalam Penerangan Jalan. May, 1–23.
Putri, M., Hulu, F. N., Abdullah, A., Abdullah, A., & Haq, M. Z. (2023). Pemasangan lampu jalan berbasis fhoto cell lingkungan XI Kec. Medan johor, Kel. Gedung Johor Prov. Sumatera Utara. Jurnal Derma Pengabdian Dosen Perguruan Tinggi (Jurnal DEPUTI), 3(2), 198–201. https://doi.org/10.54123/deputi.v3i2.282.
Rusiana Iskandar, H., & Heryana, N. (2017). Analisis Harmonik Lampu Penerangan Jalan Umum Berbasis Led Dengan Tegangan Bervariasi Dan Daya Konstan. Analisis Harmonik Lampu Penerangan Jalan Umum Berbasis Led Dengan Tegangan Bervariasi Dan Daya Konstan, 10(10), 16–33.
Sutono, S. S. (2015). Perancangan sistem aplikasi otomatisasi lampu penerangan menggunakan sensor gerak dan sensor cahaya berbasis arduino uno (atmega 328). Majalah Ilmiah UNIKOM, 12(2), 223–232. https://doi.org/10.34010/miu.v12i2.25
